United ipinle (English)
Home » DTF Printer » Will the DTF Printer board get wet? What should I do if the board gets wet?

Will the DTF Printer board get wet? What should I do if the board gets wet?

If the heat press printing machine has been in a humid space, the board will also be damp. Once the printing machine board gets wet, it is easy to cause board card corrosion and component damage. I...
Rated 4.6/5 based on 451 customer reviews
Share:
Content

If the heat press printing machine has been in a humid space, the board will also be damp. Once the printing machine board gets wet, it is easy to cause board card corrosion and component damage. In severe cases, it may cause a short circuit, which directly burns the board or other parts of the printing machine.

What should I do if the board gets wet? When we find that the board of the white ink heat press printing machine is damp, we should not continue to start it up as usual. What we need to do is to remove the board from the machine, then dry it, and check the following items after drying Whether the function is normal, use it after confirming that there is no potential safety hazard.

In order to prevent the board of the white ink heat press printing machine from being damp, we need to control the humidity of the working environment of the white ink heat press printing machine below 60%. This is also part of the daily maintenance of the white ink heat press printing machine operator. If the board card is damp, it must be dealt with in time to minimize the loss as much as possible. The working environment of the white ink heat transfer printing machine must maintain a suitable temperature and humidity.

 

Inquiry
* Name:
* Email:
Country:
Tel:
* Message:
More DTF Printer