How to deal with the failure of ink dripping and ink throwing in the dtf printer?
DTF Printer is a garment printing machine that can print any pattern. This kind of printing equipment has great requirements for the temperature and humidity in the air, or it is a relatively delicate printing equipment. In the process of use, it needs good maintenance, otherwise it will be prone to problems. Especially its nozzles, because the nozzles require higher precision, the nozzles are more expensive than other accessories, and there are more problems that need to be paid attention to in maintenance.
Today I will explain to you how to solve the problem of ink dripping and ink throwing in the dtf printer. Ink dripping from the nozzle is not necessarily the problem of the nozzle, but it may also be caused by other accessories. TEXTEK will analyze it for everyone.
There are the following points that can cause the failure of dripping ink and throwing ink:
1. Ink changes caused by the temperature of the studio being too low or too high
Solution: Adjust the temperature of the studio to a suitable temperature, 20°C-35°C is the best.
2. Due to the slight ink blockage of the nozzle
Solution: Use the dtf printer automatic cleaning system to clean the nozzle repeatedly. If the problem cannot be solved, you can use the nozzle cleaning solution for deep cleaning.
3. Due to rupture of pipe or ink sac
Solution: If the failure is caused by a ruptured pipe or ink sac, you need to replace the ruptured pipe and ink sac to solve the problem.
4. Due to ink quality problems
Solution: If the purchased ink does not match the nozzle, or the failure is caused by the poor quality of the ink, then only replace the new ink.
5. The failure caused by the failure of the mobile trolley
Solution: If the mobile trolley is not stable and shakes when it moves on the guide rail, causing ink dripping and ink throwing failure, then only professional maintenance personnel should be asked to deal with it.