90% of the failures of dtf machines are due to failure to do these details well
Even the best equipment will have some minor problems, and dtf machines are no exception. At this time, operators need to learn how to maintain and maintain the dtf heat transfer printer in order to better protect it, reduce the occurrence of failures, and extend the service life, which means saving costs and increasing profits. Dtf transfer also requires daily maintenance so that it can work better the next day. And 90% of the problems that occur dtf printers are caused by operators failing to do the following maintenance skills.
So what should you pay attention to when using a best dtf printer? What maintenance needs to be done every day? TEXTEK digital printer manufacturer will explain to you:
1. When adding ink, the ink level should be kept between the first and second liquid levels in the bulk ink tank.
2.Printer ink should be stored in a cool place away from direct sunlight, and it is recommended to use up the ink within half a month after opening.
3.There should be no commonly used household appliances near the printer, it should be kept away from large magnetic fields and electric fields, and it should not share the same plug-in board with household appliances.
4.When the device uses RIP software to print pictures, be sure to turn off the computer’s firewall, and clean up unused album files in the computer in time to be fully prepared for the next printing.
5.When the printing time is sufficient and the work progress is not affected, you can print in 4PASS or above mode, which will cause the least damage to the equipment.
6.In the printer equipment operating room, try to maintain constant temperature and humidity. The suitable temperature for digital printing machines is around 20-35 degrees celsius, and the humidity is around 35-65%.
7.Pay attention to dust-proof indoors and do not place them together with machines that are prone to smoke and dust. The equipment must be wiped clean before and after use.
8.It is not recommended to use printing media with too poor quality, which can easily damage the printhead.
9.Check the cleaning status of the Guide rails, Wipers, and Encoder strips at least once a week. If there are any debris, clean them and remove them in time.
10.When shutting down, first turn off the control software, then turn off the main power switch, ensure that the carriage board returns to the normal position, and ensure that the printhead and ink station are completely closed to avoid clogging the printhead.
