Integrated pinch roller DTF Shirt Printer,dual temperature and dual control,TK-A3 Pro
The front and rear heating of the machine are equipped with 2 independent thermostats, which are easy to control, and are generally set to 40-45 degrees before leaving the factory. The pre-heating is to dry the ink of the film after printing a little, and the post-heating is to simply dry the material before printing to dehumidify and ensure better printing color and pigment adhesion.
There is a shaft under the fuselage, the function 1 is to make the film close to and then heated to ensure better dehumidification and drying effect; the function 2 is to make the paper shortage device better sense the film.
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint
There are 2 independent protective sleeves in the ink chain to protect the ink tube and the flat wire respectively. There is a cable protection cover at the opening of the machine to reduce wear and prolong the service life.
The machine supports 110V/220V voltage and does not need a transformer for customers who require 110V.
