4 things to keep in mind when using the DTF Printer Heat Press machine
1. Heat transfer pressure: The hot stamping pressure must be adjusted to the most suitable value. Otherwise, if the pressure is too large, it will easily burn the plastic head; So, adjusting to the most suitable heat transfer pressure is the pressure lock that needs to be adjusted to avoid changes in mass production.
2. Keep the machine clean and tidy: There is no dust and oil stuck on it, especially in some of the above important parts, the heat transfer film that is kept clean can not be stained with oil, dust and fingerprints, it is necessary to keep clean and tidy during operation, with clean hands and no sweat.
3. Temperature: Be sure to pay attention to the temperature when using the hot stamping machine, because the difference in temperature will easily affect the hot stamping effect. If the temperature is too high, it will easily burn the items, but if the temperature is too low, the hot stamped products may not be clear enough. Therefore, it is necessary to control the temperature according to the different products.
4. Hot stamping speed: The speed also needs to be determined according to the hot stamped items, because the hot stamping time of different items also needs to be changed accordingly.
