DTF Printer on Scarf with Textek Factory Direct Supply

High speed, Plate free, No pre-coating, No contour cutting, Environmental friendly, Textek DTF printer is your best choice to DIY t-shirt, sportswear, bag, shoes, socks etc.

A3 Pro DTF Printer
DTF Shirt Printer TK-A3 Pro
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: CMYK+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

DTF printing machine is a heat transfer process that has the ability to last as long as traditional silkscreen prints,it have brigh future
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: CMYK+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

Textek 30cm epson dtf printer use double Epson XP600 heads, we are professional dtf printer factory located in Zhengzhou, we can offer direct to film printer with good price.
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

Since DTF Printer has been put in the market,DTG market is occupied and replaced by DTF printer gradually.
So what maket this happen finally?
Pls check the following comparison.

A3 Pro DTF Printer
DTF Shirt Printer TK-A3 Pro
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink,Flurescent color is more popular.
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint,CADLINK,etc

Digital Transfer Film is the newest method in the digital printing world. With this DTF method, it will be easy to print t-shirts. In addition, the texture of the print is very strong and elastic because the ink material is made of plastisol, assisted by adhesive glue or powdered flour to attach the printout from the film to the t-shirt material, the print is tight without porous and looks solid. More detail information please contact us.
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint
Other Types: 60cm DTF Printer

Textek provides DTF printer with dual Epson XP600 Printhead, whose speed up to 4.5sqm/h, high speed and low labor cost. It is good for clothes printing for any fabric and any color without destroying clothes, and thousands of times wash, intact still. The brillant color and special design makes your clothes a hot sale.
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

Before A3 DTF printer packing and delivery,we take video to record what spare parts we put inside the machine box,which ensures clients get machines without anything missing.

A3 Pro DTF Printer
DTF Shirt Printer TK-A3 Pro
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint.CADlink.

Textek A3 Pro original desktop DTF printer is the most popular model in the DTF world,affordable price and stable printing performance are waiting for any client to earn money together!

A3 Pro DTF Printer
DTF Shirt Printer TK-A3 Pro
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

Textek powder shaker machine offers stable powder dusting performance,which is vital for DTF printing.We have been keeping updating the technology,welcome to visit our factory for more cooperation.

Textek Factory Promotion A3 DTF printer printing is much more versatile and can print on a large range of apparel such as nylon, polyester, denim, silk, and of course cotton. Due to the increased number of printing applications, DTF printing is fast becoming one of the most popular methods to print t shirts and apparel.

Model: Tk-A3 Pro (A3 DTF Printer)
Nozzle Model: 2*Epson XP600
Printing speed: high speed mode 4.5©O/h
HD mode 3.5©O/h
Color: 4C+W or 6C+W (Lc Lm or fluorescent light optional)
Print Format: 300 mm (12 inches)
Media Transport: Paper Tension
Heating device: front and rear heating
Ink circuit system: automatic ink supply, white ink circulation stirring
Power supply: 110V/220V 50-60HZ
Power: 4KW
Working Environment: Temperature 10-38¡æ Humidity 40-70ph

Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: CMYK+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

Our DTF printer adopts dual EPSON XP600 print head 30cm width and 2/4*Epson I3200-A1 print head 60cm width, which is good for beginner and young entrepreise. You can custom not only the machine itself, but also DIY varios patterns, make your stuff special and get high profit.
Printhead: 2/4*Epson I3200-A1
Printing Speed: 12-15sqm/h
Print Width: 60cm(24 inch)
Ink: Pigment Ink
Ink Color: CMYK+W Printing
RIP Software: Maintop, Photoprint

Textek launched new upgraded TK-A3 Pro DTF transfer printer, with stable and functional powder shaker, we can also offer good performance pigment ink with Japanese ingredients, PET film and powder. Low investment for T-shirt shops, good profits, global dealers wanted.
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

Textek is a professional and experienced DTF printer factory in China, There are many experienced engineers in our DTF printer team, as well as we can offer high quality machine with whosale price and better after-sale service. All our printers are strictly tested, and DTF printer is a good option to to make your print unique and speical.
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

Epson print head stable and durable
Good printing lasting as ink continued offered
Precipitation preventing by white ink stirrer
No clogging on print head
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: CMYK+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

Equipped EPSON I3200-A1 printhead,4 pass printing speed 16 sqm/h.
Easy to operate,max support 9 gray scale
Printhead: 2/4*EPSON I3200-A1
Printing Speed: 16sqm/h
Print Width: 60cm(24 inch)
Ink: Pigment Ink
Ink Color: CMYK+W
RIP Software: Maintop, Photoprint

2pcs head XP600 Honson board with stable performance and higher printing efficiency.
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

Apply adhesive to custom DTF transfer printing
This is a unique powder adhesive coating that gives DTF prints an iconic soft touch. Different from thick transfer film or vinyl film, the direct film-forming process has only two components. Ink and a thin layer of powdered adhesive.
The soft feel of DTF is the Holy Grail of custom clothing. In the process of transfer printing, it is never possible to obtain the incredible softness of halftone screen printing. But with DTF, you will get more.
DTF powder adhesive seeks moisture, so it will suck itself into the printing ink and bond chemically to form a strong permanent adhesive that adheres very firmly to cotton and polyester fibers.

DTF printing is much more versatile and can print on a large range of apparel such as nylon, polyester, denim, silk, and of course cotton. Due to the increased number of printing applications. DTF printing is fast becoming one of the most popular methods to print t shirts and apparel.
DTF printing has revolutionized the textile industry and updated textile creation for the digital era. The process is straightforward: digital artwork is created, printed on the film, then transferred onto the fabric.
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

We are the source factory. We offer complete one-stop service from independent R&D, independent processing of raw materials, production, assembly, delivery to after-sales support, and our board can be guaranteed for three years.
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: CMYK+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

Compare to A3 DTG printer, this 30 cm DTF printer with automatic roll to roll rewinding system, can support large-trade printing business. This printer generally together with greasepaint shaking and hotting machine to ameliorate the product effective. The finished film can be tansferred on any kind of fabric.
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

Textek A3 DTF printer use Honson boards, the printing effect is better. Textek has more than 20 years of experience, with more experience in pet film printer design and improvement, and the printer is more convenient to use. There are agents in many places, such as Italy, Colombia, Spain, etc. and you are also welcome to become our agents.
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint
Other Types: 60cm DTF Printer

Textek A3 DTF printer, can print on any fabric and other kind of materials like wood. This printer usually use mirror printing on the film(first color and then white).And also curing by hot melt powder,which can make sure the adhesive and fix the color well. Then heat press transfer this printed film on other materials’s surface.

Textek A3 DTF printer, with 2 pcs XP600 printhead, CMYK+White configuration, widely used in T shirt printing, satisfy with your all demands on shirt printing.
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

In our daily life, we see exquisite pictures printed on clothes, bags or canvas shoes, and we are wondering how these special patterns attached on the textile. Actually, this process called heat transfer. It is achieved by DTF print and sublimation print, therefore, we are curious about the difference between them, and which one is better?

Textek 60cm powder shaker is well matched with 60cm DTF printer,offers stable dusting and heating performance.

Textek A3 dtf printer, 30cm width, DTF printer with core technology in T shirt printing, its your best choice in an new business.
Printhead: 2*EPSON XP600
Printing Speed: 4.5sqm/h
Print Width: 30cm(12 inch)
Ink: 4C+W or 6C+W Pigment Ink
Ink Color: 6 Color Printing
RIP Software: Maintop, Photoprint

This printer is used to print the logo and artworkers on the single-side coated PET film.this solution includes the STS automatic TPU adhesive powder vibrator, which evenly distributes the hot melt powder adhesive on the artwork so that the film can be transferred to the fabric.The device also includes infrared heating to bond the powder to the film.

Details
1.Platform accuracy is ±2 wires (0.02mm), and flatness of platform is guaranteed to greatest extent.
2.In case of emergency, such as paper arching, etc., uses can stop A3 DTF printer in time.
3.When there is no paper, it will automatically stop printing, so as to avoid waste of ink and pollution of platform.
4.There is a shaft under fuselage, can make film close to heating to ensure better dehumidification and drying effect.
We are a professional manufacturer engaged in R&D, production, sale and service of fabric printer. We supply TEXTEK large DTF printer, A3 DTF printer, sublimation fabric printer, direct to textile printer and related consumables, such as DTF ink, pet film, powder, etc.