Textek sublimation printers all use Epson original I3200-A1 print heads. The ink sequence and installation precautions of the print heads are as follows.
    1. Ink sequence installation sequence
    Note: Please follow the correct ink sequence to connect the ink tube and the print head adapter tube

    2.  Print head installation method

    3. Tips for using Textek sublimation printer

•  Shut down in accordance with the prescribed procedures (turn off the control software first, and then turn off the power switch when shutting down) to ensure that the carriage returns to its normal position, and the print head and cap station are completely sealed to avoid nozzle blockage.

 

•  When replacing the cap, it is recommended to use the original cap , otherwise it may deform and cause nozzle clogging, nozzle missing, incomplete ink extraction, and incomplete ink extraction. If the equipment is not used for more than three days, please clean the cap and waste ink tube with cleaning liquid to prevent dry blockage.

 

•  It is recommended to use the original ink, and it is strictly forbidden to mix two different brands of ink, so as to avoid chemical reaction, block the nozzle, and affect the picture quality.