The key to adjusting the color of the Direct textile printer starts from two levels:
1. Adjust according to the image processing software, which tests the basic skills of the operator’s design scheme.
2. Adjust according to the printing software that matches the direct-injection printing machine.

According to continuous adjustment, it can generally be close to the original photo.The specific method is as follows:

1. Adjust color by image processing software

The pattern design of Direct textile printer generally has a certain deviation from the original photo. For different pattern designs, the deviation value is likely to be different. When the deviation is not within the scope of acceptance, the picture is generally used Processing software to adjust the color, AI, PHOTOSHOP, etc. are all possible. After adjustment, perform trial printing, and then compare it with the original photo. It will go back and forth until it is close to the original photo. This mainly depends on the design of the operating staff, the ability of graphics processing software to operate, attentiveness, work experience, etc. .

2. Adjust the color according to the printing control software

The printing control software supporting Direct textile printer also has a simple adjustment function, but the scope of this adjustment is relatively limited. It can only adjust the design style of all pictures, and cannot make partial adjustments, so it is rarely used.

Of course, sometimes, no matter how you grade it, it is not satisfactory, for the following reasons:

1. Ink color density

In the case of low ink density, in the case of dark printing, no matter how you adjust it, you cannot achieve a satisfactory level. For example, if you want to print dark black, and the black ink has a low color density, no matter how you adjust it Color, the print will only be light black.

2. ICC curve

When the ink curve is not matched with the RIP software, the printed pattern design will have a very large color cast. No matter how you adjust the color, it is unlikely to be close to the original image. It is usually the case when you change the ink brand privately. .

3. Waveform

The actual effect of the waveform on the pattern design is also very large, which generally depends on the board provider.