Transfer on Socks Step-by-Step Process
1. Choose Your Designs
Select fun and festive graphics such as:
Snowflakes
Reindeer
Christmas trees
Candy canes
Santa Claus
You can also add personalized messages like “Merry Christmas” or family names.
2. Print the Design
Print the design onto the DTF film using DTF inks. Ensure that the image is mirrored if it contains text.
3. Apply Adhesive Powder
While the print is still wet, sprinkle heat transfer powder evenly over the design.
Shake off any excess powder to ensure an even coating.
4. Cure the Design
Use a heat source to cure the powder. Set your heat press to around 160-180°C (320-356°F) and heat for about 30 seconds.
Allow the film to cool completely.
5. Prepare the Socks
Ensure the socks are clean and wrinkle-free. Pre-press them for a few seconds to remove any moisture.
6. Position the Design
Place the cured DTF film onto the sock in the desired location.
7. Press the Design
Use a heat press to apply the design:
Set the temperature to about 160-180°C (320-356°F).
Press for 15-20 seconds with medium pressure.
Refer to the specific instructions for your DTF film for optimal results.
8. Peel the Film
Allow the socks to cool slightly, then carefully peel off the DTF film. The design should adhere to the sock surface.
Your vibrant Christmas-themed socks are ready to wear or gift!
Custom Christmas socks are a fun and creative way to celebrate the holiday season. Whether you're making them for yourself, as gifts, or for family gatherings, these personalized socks are sure to spread joy and warmth. So get creative, and let the Christmas atmosphere fill your home and wardrobe this festive season!