1.Design and Preparation:
Begin by creating or selecting the desired design for the safety helmet. Ensure that the design aligns with safety regulations and requirements, incorporating necessary symbols, logos, or identification elements. Once the design is finalized, prepare it for printing using design software compatible with UV-F30.

2.Prepare the UV-F30 Printer:
Ensure that your UV-F30 printer is properly set up and ready for printing. Follow the manufacturer's instructions for loading the UV DTF film and calibrating the printer settings. Make sure the printer is clean and free from any debris that could affect the print quality.

3.Print the Design:
Using the UV-F30 printer, print the design onto the UV DTF film. Ensure that the film is aligned correctly and securely attached to the printer's platen to avoid any misalignment during printing. Set the printer to the appropriate print settings for UV DTF film, including ink density, resolution, and curing time.

4.Cure the Printed Film:
After printing, carefully remove the printed UV DTF film from the printer. Place the film in a UV curing machine or under UV lamps to cure the ink. Follow the recommended curing time and temperature specified by the UV-F30 printer manufacturer to ensure proper adhesion and durability of the print.

5.Prepare the Safety Helmet:
Clean and prepare the surface of the safety helmet before applying the printed UV DTF film