Everyone knows that the pros and cons of heat transfer machines will directly affect the final hot stamping effect of the heat transfer material, so the three elements of hot stamping: pressure, temperature, and speed are indispensable. Therefore, it is particularly important to choose a good heat press machine. The following editor will introduce how to detect heat press machine from three aspects.

First of all, one of the core components of the heat transfer machine is the heating plate. Therefore, you should pay attention to the heating plate when choosing a heat transfer machine. Check that the upper and lower plates should be made of aluminum, and the heating tube is cast inside the aluminum plate. If the upper plate is slotted on an aluminum plate and is attached to it with a heating tube, it will cause unnecessary energy loss, and there will be shortcomings such as slow heating and large constant temperature difference during use. In addition, if the lower plate is made of iron plate or other materials, it will be easily deformed and aging if it works in a long-term high temperature and high pressure environment.

Second, depending on the area of ​​the heating plate, both the upper and lower plates have weight standards, and the hot stamping pressure must be adjusted to the most appropriate level, otherwise the plastic head and the object will be damaged if it is too small, and the hot stamping effect will be affected if it is too small.

Third, after the upper plate of the heat press machine is pressed down, it should be absolutely parallel to the lower plate. If you want to test whether the upper and lower plates are tightly occluded, you can put a piece of cardboard or other pieces of flexible material on the four corners, and then press down the handle. After the upper and lower plates are locked, pull the hard paper outwards. , You can know whether the upper and lower plates are flat and whether the machine is qualified.