Calibration of A3 DTF printer is an extremely important link in debugging of DTF printer. When there is a problem with bidirectional calibration, it will seriously affect printing effect of DTF printer, and there will be a problem of left and right misalignment.

A3 DTF printer calibration is divided into vertical calibration and horizontal calibration. Debugging steps are as follows: open print settings in software, and then click each parameter calibration, you can see bidirectional calibration, click dual calibration and wait for machine to print, and then enter corresponding value in bidirectional calibration.

Under normal circumstances, Textek DTF printer factory has undergone bidirectional calibration and debugging in advance. What should I do when there is a problem with bidirectional calibration due to installation or site reasons? First of all, we have to troubleshoot problem. Several common troubleshooting methods are as follows:

1. Check whether vertical alignment is correct;
2. Y motor gear cap is loose and re-fixed;
3. Check whether encoder strip is worn or it is too dirty and uneven;
4. Reinstall control software.

Textek printing factory (www.textek.cn) is a leading manufacturer & supplier of advanced digital textile printing machine.We supply DTF Printers, Sublimation Printers, Direct Fabric Printers, Printing Media, and other supplies. 

Textek's business covers many countries around the world, including emerging markets and mature markets.We have a complete sales system and are committed to using our professional knowledge and first-class service to help customers improve their digital printing business.