During normal working process of A3 DTF Printer, there may be a problem of burrs. Burr of picture will greatly reduce picture quality and affect working efficiency ofA3 XP600 DTF Printer. So what's causing it?

1. Ink or material quality of A3 DTF Printer is a problem. If ink adhesion is poor, it is easy for ink to not penetrate into material, resulting in burrs; if printing material is not made of good material and does not absorb ink, there will also be a problem of burrs on picture. It is recommended to use high-quality ink and material when purchasing.

2. Nozzle of A3 DTF Printer are dirty. There is residual ink and dust attached to nozzle of A3 XP600 printhead, which will affect normal ink jetting of printhead, and then cause problem of printing burrs. At this time, you can use cleaning function of printer to clean nozzle, or you can also wipe it with a cotton swab dipped in alcohol .

3. Influence of indoor temperature and humidity. XP600 printhead of A3 DTF printer is relatively precise and has certain requirements for indoor working environment. When indoor temperature and humidity are too high or too low, fluency of ink and dryness of printing medium will be affected, resulting in burrs in printing of printer.

Printing quality of a A3 DTF Printer is a direct reflection of working state of a A3 DTF Printer. When these large and small printing problems occur in A3 XP600 DTF Printer, users should deal with them in time to avoid small problems affecting normal work of A3 DTF Printer.

Textek printing factory (www.textek.cn) is a leading manufacturer & supplier of advanced digital textile printing machine.We supply DTF Printers, Sublimation Printers, Direct Fabric Printers, Printing Media, and other supplies. 

Textek's business covers many countries around the world, including emerging markets and mature markets.We have a complete sales system and are committed to using our professional knowledge and first-class service to help customers improve their digital printing business.